Husqvarna TC250 TX300 HERITAGE 2023 Service Schedule

Service work After 1 operating hour Every 15 operating hours Every 45 operating hours Every 90 operating hours Every 24 months
Check the spoke tension. (๐Ÿ“– p. 133) โ—‹ โ— โ— โ—
Check the chain, rear sprocket, engine sprocket, and chain guide. (๐Ÿ“– p. 142) โ—‹ โ— โ— โ—
Check the chain tension. (๐Ÿ“– p. 141) โ—‹ โ— โ— โ— โ—
Grease all moving parts (e.g., hand lever, chain,…) and check for smooth operation. โ—‹ โ— โ— โ— โ—
Check the basic throttle valve position sensor setting. (๐Ÿ“– p. 261) โ—‹ โ— โ— โ—
Change the spark plug and spark plug connector. (๐Ÿ“– p. 272) โ— โ— โ—
Change the fuel filter. (๐Ÿ“– p. 125) โ— โ—
Check the clutch. (๐Ÿ“– p. 243) โ— โ— โ—
Clean the air filter and air filter box. (๐Ÿ“– p. 114) โ— โ— โ— โ—
Change the glass fiber yarn filling of the main silencer. (๐Ÿ“– p. 109) โ— โ—
Service the fork. (๐Ÿ“– p. 21) โ— โ—
Perform the shock absorber service. (๐Ÿ“– p. 83) โ— โ—
Check all screws, nuts, and hose clips for a tight fit. โ—‹ โ— โ— โ— โ—
Change the fuel screen. (๐Ÿ“– p. 127) โ—‹ โ— โ— โ— โ—
Check the fuel pressure. (๐Ÿ“– p. 122) โ—‹ โ— โ— โ—
Check the antifreeze and coolant level. (๐Ÿ“– p. 251) โ— โ—
Check the coolant level. (๐Ÿ“– p. 252) โ—‹ โ—
Change the coolant. (๐Ÿ“– p. 255) โ—
Check steering head bearing play. (๐Ÿ“– p. 60) โ—‹ โ—
Lubricate the steering head bearing. (๐Ÿ“– p. 56) โ— โ— โ—
Check the electric starter drive. (๐Ÿ“– p. 224) โ— โ— โ—
Check the reed valve housing, reed valve and intake flange. (๐Ÿ“– p. 207) โ— โ— โ—
Perform minor engine service. (Change the piston. Check the cylinder head. Change the O-rings of the manifold and the cylinder head. Check the cylinder and Z dimension. Clean the exhaust control. Check the exhaust control for function and smooth operation. Program the exhaust control end positions. Check and clean the pressure sensor flange.) โ— โ— โ—
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool. โ—‹ โ— โ— โ— โ—
Check that the electrical system is functioning properly. โ—‹ โ— โ— โ—
Check and charge the 12-V battery. โ—‹ โ— โ— โ— โ—
Check that the brake linings of the front brake are secured. (๐Ÿ“– p. 157) โ—‹ โ— โ— โ— โ—
Check that the brake linings of the rear brake are secured. (๐Ÿ“– p. 164) โ—‹ โ— โ— โ— โ—
Check the brake discs. (๐Ÿ“– p. 132) โ—‹ โ— โ— โ— โ—
Check the brake lines for damage and tightness. โ—‹ โ— โ— โ— โ—
Check the front brake fluid level. (๐Ÿ“– p. 160) โ—‹ โ— โ—
Change the front brake fluid. (๐Ÿ“– p. 162) โ— โ—
Check the rear brake fluid level. (๐Ÿ“– p. 168) โ—‹ โ— โ—
Change the rear brake fluid. (๐Ÿ“– p. 170) โ— โ—
Check/correct the fluid level of hydraulic clutch. (๐Ÿ“– p. 241) โ—
Change the hydraulic clutch fluid. (๐Ÿ“– p. 241) โ— โ—
Check the free travel of the hand brake lever. (๐Ÿ“– p. 160) โ—‹ โ— โ— โ— โ—
Check the free travel of the foot brake lever. (๐Ÿ“– p. 167) โ—‹ โ— โ— โ— โ—
Check the idle speed. โ—‹ โ— โ— โ— โ—
Change the gear oil. (๐Ÿ“– p. 267) โ—‹ โ— โ— โ— โ—
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for cracking, tightness, and correct routing. โ—‹ โ— โ— โ— โ—
Check the cables for damage and that there are no kinks in the routing. โ— โ— โ— โ—
Check that the throttle cables are undamaged, routed without kinks, and set correctly. โ— โ— โ— โ—
Check the frame. (๐Ÿ“– p. 68) โ— โ— โ—
Check the link fork. (๐Ÿ“– p. 103) โ— โ— โ—
Check the fork bearing for play. (๐Ÿ“– p. 103) โ— โ—
Check the heim joint for play. (๐Ÿ“– p. 82) โ— โ—
Check the shock absorber linkage. (๐Ÿ“– p. 80) โ— โ— โ—
Check the tire condition. (๐Ÿ“– p. 131) โ— โ— โ— โ—
Check tire pressure. (๐Ÿ“– p. 131) โ—‹ โ— โ— โ— โ—
Check the wheel bearing for play. (๐Ÿ“– p. 132) โ— โ— โ—
Check the wheel hubs. โ— โ— โ—
Check the rim run-out. (๐Ÿ“– p. 133) โ—‹ โ— โ— โ—
โ—‹ One-time interval    โ— Periodic interval

Husqvarna TC250 TX300 HERITAGE Repair manual 2023 Pdf Download