Husqvarna TE 250-300 2025 Service Schedule

Service work After 1 operating hour Every 15 operating hours Every 45 operating hours Every 90 operating hours Every 24 months
Check the spoke tension. (๐Ÿ“– p. 149) โ—‹ โ— โ— โ—
Check the chain, rear sprocket, engine sprocket, and chain guide. (๐Ÿ“– p. 160) โ—‹ โ— โ— โ—
Check the chain tension. (๐Ÿ“– p. 159) โ—‹ โ— โ— โ— โ—
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth operation. โ—‹ โ— โ— โ— โ—
Check the basic throttle valve position sensor setting. (๐Ÿ“– p. 295) โ—‹ โ— โ— โ—
Change the spark plug and spark plug connector. (๐Ÿ“– p. 321) โ— โ—
Change the fuel filter. (๐Ÿ“– p. 135) โ— โ—
Check the clutch. (๐Ÿ“– p. 271) โ— โ—
Clean the air filter and air filter box. (๐Ÿ“– p. 127) โ— โ— โ— โ—
Change the glass fiber filling of the muffler. (๐Ÿ“– p. 123) โ—
Carry out fork service. (all except PRO models) (๐Ÿ“– p. 22) โ— โ—
Carry out fork service. (all PRO models) (๐Ÿ“– p. 43) โ— โ—
Service the shock absorber. (๐Ÿ“– p. 88) โ— โ—
Check all screws, nuts, and hose clamps for a tight fit. โ—‹ โ— โ— โ— โ—
Change the fuel screen. (๐Ÿ“– p. 134) โ—‹ โ— โ— โ— โ—
Check the fuel pressure. (๐Ÿ“– p. 140) โ—‹ โ— โ— โ— โ—
Check the frost protection and coolant level. (๐Ÿ“– p. 279) โ— โ—
Check the coolant level. (๐Ÿ“– p. 280) โ—‹ โ—
Change the coolant. (๐Ÿ“– p. 283) โ—
(all PRO models) Check that the radiator fan is functioning properly. โ—‹ โ— โ— โ—
Check the headlight setting. (๐Ÿ“– p. 191) โ—‹ โ— โ— โ—
Check the steering head bearing play. (๐Ÿ“– p. 68) โ—‹ โ—
Lubricate the steering head bearing. (๐Ÿ“– p. 63) โ— โ— โ—
Read out the fault memory using the diagnostics tool. โ—‹ โ— โ— โ— โ—
Check that the electrical equipment is functioning properly. โ—‹ โ— โ— โ—
Check and charge the 12 V battery. โ—‹ โ— โ— โ— โ—
Check that the brake pads of the front brake are secured. (๐Ÿ“– p. 176) โ— โ— โ— โ—
Check that the brake pads of the rear brake are secured. (๐Ÿ“– p. 183) โ— โ— โ— โ—
Check the brake discs. (๐Ÿ“– p. 148) โ— โ— โ— โ—
Check the brake lines for damage and tightness. โ— โ— โ— โ—
Check the brake fluid level for the front brake. (๐Ÿ“– p. 179) โ— โ—
Change the brake fluid for the front brake. (๐Ÿ“– p. 181) โ— โ—
Check the brake fluid level for the rear brake. (๐Ÿ“– p. 186) โ— โ—
Change the brake fluid for the rear brake. (๐Ÿ“– p. 187) โ— โ—
Check/correct the fluid level of the hydraulic clutch. (๐Ÿ“– p. 269) โ—
Change the hydraulic clutch fluid. (๐Ÿ“– p. 269) โ— โ—
Check the free travel on the hand brake lever. (๐Ÿ“– p. 178) โ—‹ โ— โ— โ— โ—
Check the free travel of the brake pedal. (๐Ÿ“– p. 185) โ— โ— โ— โ—
Check the idle speed. โ—‹ โ— โ— โ— โ—
Change the gear oil. (๐Ÿ“– p. 304) โ—‹ โ— โ— โ—
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and boots for cracking, leaks, and correct routing. โ—‹ โ— โ— โ— โ—
Check the cables for damage and that there are no kinks in the routing. โ— โ— โ— โ—
Check that the clutch cables are undamaged, routed without kinks, and set correctly. โ— โ— โ— โ—
Check the frame. (๐Ÿ“– p. 76) โ— โ— โ—
Check the swingarm. (๐Ÿ“– p. 106) โ— โ— โ—
Check the swingarm bearing for play. (๐Ÿ“– p. 111) โ— โ—
Check the heim joint on the shock absorber for play. (๐Ÿ“– p. 106) โ— โ—
Check the shock absorber linkage. (๐Ÿ“– p. 106) โ— โ— โ—
Check the tire condition. (๐Ÿ“– p. 146) โ— โ— โ— โ—
Check the tire pressure. (๐Ÿ“– p. 146) โ— โ— โ— โ—
Check the wheel bearing for play. (๐Ÿ“– p. 147) โ— โ— โ—
Check the hubs. โ— โ— โ—
Check the rim run-out. (๐Ÿ“– p. 148) โ—‹ โ— โ— โ—
โ—‹ One-time interval    โ— Periodic interval

Husqvarna TE 250-300 Repair manual 2025 Pdf Download