Husqvarna TE250i TE300i (2022) Service Schedule

Service work After 1 operating hour After 5 operating hours Every 20 operating hours Every 45 operating hours Every 90 operating hours
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect routing.
Check the antifreeze and coolant level. (📖 p. 275)
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Clean the air filter and air filter box. (📖 p. 97)
Change the glass fiber yarn filling of the main silencer. (📖 p. 95)
Service the fork. (📖 p. 20)
Perform the shock absorber service. (📖 p. 65)
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Change the fuel screen. (📖 p. 106)
Check the fuel pressure. (📖 p. 105)
Check the headlight setting. (📖 p. 172)
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool.
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the 12-V battery.
Check the front brake linings. (📖 p. 150)
Check the brake linings of the rear brake. (📖 p. 159)
Check the brake discs. (📖 p. 119)
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (📖 p. 164)
Check the free travel of the foot brake lever. (📖 p. 163)
Check the frame. (📖 p. 50)
Check the link fork. (📖 p. 83)
Check the fork bearing for play. (📖 p. 83)
Check the shock absorber heim joint for play. (📖 p. 90)
Check the shock absorber linkage. (📖 p. 62)
Check the tire condition. (📖 p. 117)
Check tire pressure. (📖 p. 117)
Check the wheel bearing for play. (📖 p. 118)
Check the wheel hubs.
Check the rim run-out. (📖 p. 120)
Check the spoke tension. (📖 p. 119)
Check the chain, rear sprocket, engine sprocket, and chain guide. (📖 p. 130)
Check the chain tension. (📖 p. 130)
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth operation.
Check/correct the fluid level of hydraulic clutch. (📖 p. 263)
Check the front brake fluid level. (📖 p. 155)
Check the free travel of the hand brake lever.
Check the steering head bearing for play. (📖 p. 41)
Change the spark plug and spark plug connector. (📖 p. 303)
Check the reed valve housing, reed valve, and intake flange. (📖 p. 226)
Change the gear oil. (📖 p. 286)
○ One-time interval    ● Periodic interval

Husqvarna TE250i TE300i Service Manual (2022) Pdf