KTM 300 XC-W Factory Hardenduro 2025 Service Schedule

Service work After 1 operating hour Every 15 operating hours Every 45 operating hours Every 90 operating hours Every 24 months
Check the chain tension. (๐Ÿ“– p. 183) โ—‹ โ— โ— โ— โ—
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth operation. โ—‹ โ— โ— โ— โ—
Check the basic throttle valve position sensor setting. (๐Ÿ“– p. 317) โ—‹ โ— โ— โ—
Change the spark plug and spark plug connector. (๐Ÿ“– p. 343) โ— โ—
Change the fuel filter. (๐Ÿ“– p. 158) โ— โ—
Check the clutch. (๐Ÿ“– p. 293) โ— โ—
Clean the air filter and air filter box. (๐Ÿ“– p. 150) โ— โ— โ— โ—
Change the glass fiber filling of the muffler. (๐Ÿ“– p. 146) โ—
Carry out fork service. (All except HARDENDURO and FACTORY EDITION models) (๐Ÿ“– p. 22) โ— โ—
Carry out fork service. (All HARDENDURO models) (๐Ÿ“– p. 42) โ— โ—
Carry out fork service. (300 XC-W FACTORY EDITION) (๐Ÿ“– p. 63) โ— โ—
Service the shock absorber. (๐Ÿ“– p. 115) โ— โ—
Check all screws, nuts, and hose clamps for a tight fit. โ—‹ โ— โ— โ— โ—
Change the fuel screen. (๐Ÿ“– p. 157) โ—‹ โ— โ— โ— โ—
Check the fuel pressure. (๐Ÿ“– p. 163) โ—‹ โ— โ— โ— โ—
Check the frost protection and coolant level. (๐Ÿ“– p. 301) โ— โ—
Check the coolant level. (๐Ÿ“– p. 302) โ—‹ โ—
Change the coolant. (๐Ÿ“– p. 305) โ—
Check the headlight setting. (๐Ÿ“– p. 214) โ—‹ โ— โ— โ—
Check the steering head bearing play. (๐Ÿ“– p. 95) โ—‹ โ—
Lubricate the steering head bearing. (๐Ÿ“– p. 90) โ— โ— โ—
Checking the reed valve housing, reed valve and intake flange (๐Ÿ“– p. 260) โ— โ—
Check the starter drive. (๐Ÿ“– p. 273) โ— โ— โ—
Change the oil pump; clean the oil screen. (๐Ÿ“– p. 334) โ—
Clean the oil screen in the oil tank. (๐Ÿ“– p. 331) โ—
Read out the fault memory using the diagnostics tool. โ—‹ โ— โ— โ— โ—
Check that the electrical equipment is functioning properly. โ—‹ โ— โ— โ—
Check and charge the 12 V battery. โ—‹ โ— โ— โ— โ—
Check that the brake pads of the front brake are secured. (๐Ÿ“– p. 200) โ— โ— โ— โ—
Check that the brake pads of the rear brake are secured. (๐Ÿ“– p. 206) โ— โ— โ— โ—
Check the brake discs. (๐Ÿ“– p. 171) โ— โ— โ— โ—
Check the brake lines for damage and tightness. โ— โ— โ— โ—
Check the brake fluid level for the front brake. (๐Ÿ“– p. 203) โ— โ—
Change the brake fluid for the front brake. (๐Ÿ“– p. 204) โ— โ—
Check the brake fluid level for the rear brake. (๐Ÿ“– p. 209) โ— โ—
Change the brake fluid for the rear brake. (๐Ÿ“– p. 211) โ— โ—
Check/correct the fluid level of the hydraulic clutch. (๐Ÿ“– p. 291) โ—
Change the hydraulic clutch fluid. (๐Ÿ“– p. 291) โ— โ—
Check the free travel on the hand brake lever. (๐Ÿ“– p. 202) โ—‹ โ— โ— โ— โ—
Check the free travel of the brake pedal. (๐Ÿ“– p. 208) โ— โ— โ— โ—
Check the idle speed. โ—‹ โ— โ— โ— โ—
Change the gear oil. (๐Ÿ“– p. 326) โ—‹ โ— โ— โ—
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and boots for cracking, leaks, and correct routing. โ—‹ โ— โ— โ— โ—
Check the cables for damage and that there are no kinks in the routing. โ— โ— โ— โ—
Check that the clutch cables are undamaged, routed without kinks, and set correctly. โ— โ— โ— โ—
Check the frame. (๐Ÿ“– p. 105) โ— โ— โ—
Check the swingarm. (๐Ÿ“– p. 131) โ— โ— โ—
Check the swingarm bearing for play. (๐Ÿ“– p. 132) โ— โ—
Check the heim joint on the shock absorber for play. (๐Ÿ“– p. 132) โ— โ—
Check the tire condition. (๐Ÿ“– p. 169) โ— โ— โ— โ—
Check the tire pressure. (๐Ÿ“– p. 169) โ— โ— โ— โ—
Check the wheel bearing for play. (๐Ÿ“– p. 170) โ— โ— โ—
Check the hubs. โ— โ— โ—
Check the rim run-out. (๐Ÿ“– p. 171) โ—‹ โ— โ— โ—
Check the spoke tension. (๐Ÿ“– p. 172) โ—‹ โ— โ— โ—
Check the chain, rear sprocket, engine sprocket, and chain guide. (๐Ÿ“– p. 184) โ—‹ โ— โ— โ—
โ—‹ One-time interval    โ— Periodic interval

KTM 300 XC-W Factory Hardenduro Repair manual 2025 Pdf Download